Dabco BL-17


Product name: Dabco BL-17

Alias: Dabco BL-17, Niax A-107, Jeffcat ZF-54, PC CAT NP93, Tegoamin AS-1, delayed tertiary amine catalyst, delayed catalyst BL-17

Product description: Dabco BL-17, 78% bis(dimethylaminoethyl) ether formate DPG solution


Product properties

Appearance: light yellow liquid

Viscosity (25℃, mPa.s): 61

Density (25℃, g/cm3): 1.04

Water solubility: soluble in water

Flash point (PMCC, ℃): 65

Hydroxyl value (mgKOH/g): 476



DABCO BL-17 catalyst is a delayed-action tertiary amine polyurethane catalyst, designed to change the initial polyurethane foaming reaction, and mainly catalyzes urethane (isocyanate-water) in soft and hard polyurethane foam formulations reaction.

Typical physical properties:

Appearance Amber transparent liquid

Specific gravity 1.04

Viscosity@25℃ mPa.s 61

Water soluble at 25℃, completely dissolved

Flash point, ℃ 65



Delay polyurethane foaming reaction and improve the fluidity of polyurethane foaming products

Polyurethane catalyst with wide applicability


Product Usage

Dabco BL-17 is a delayed tertiary amine catalyst used to slow the initial reaction rate. It is mainly used to catalyze the water-isocyanate reaction in soft and rigid polyurethane foam formulations;

Dabco BL-17 is suitable for all types of flexible foams. In the early stage of the reaction, its catalytic effect is not obvious, but as the reaction progresses, the temperature rises, Dabco BL-17 is unsealed, and its reaction activity rises rapidly, extending the milky white Time, partly replaces other foaming catalysts, which can delay the milky time but does not affect post-aging;

Dabco BL-17 can also be used for some polyurethane molded rigid foams.


Shelf life:

Keep unopened for two years


Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse



200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits. Air Chemicals recommends that all polyurethane catalysts be stored in a dry and cool place with proper ventilation. All storage containers must be well sealed to avoid contact with water or other influential substances, because this may change the product in use. Performance. The storage temperature is 10°C to 30°C. Lower or higher temperatures are not suitable and should be avoided as much as possible.

Company Name: Newtop Chemical Materials (Shanghai) Co., Ltd.
Sales Manager: Hunter
E_Mail:   Hunter@newtopchem.com
Telephone: 86-021-5657 7831
Fax: 86-021-5657 7830
Address: Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)
Website: www.bdmaee.net

BDMAEE:Bis (2-Dimethylaminoethyl) Ether

CAS NO:3033-62-3

China supplier

For more information, please contact the following email:


BDMAEE Manufacture !