Dabco hard foam catalyst


Product name: Dabco PT302

Alias: Dabco PT302, low odor tertiary amine catalyst, low odor catalyst PT302, Dabco hard foam catalyst

Product description: Dabco PT302


Product properties:

Appearance: light yellow liquid

Viscosity (25℃, mPa.s): 90

Density (25℃, g/cm3): 0.99

Water solubility: soluble in water

Flash point (PMCC, ℃): 98

Hydroxyl value (mgKOH/g): 470

CAS Dabco PT302 main use Dabco PT302

Product Specifications Dabco PT302 Brand Other

Executive Standard Dabco PT302 Effective Substance Content (%) Dabco PT302


Product Usage:

Dabco PT302 is a high-efficiency, low-odor tertiary amine catalyst that can accelerate the gel reaction. It is mainly used for polyurethane rigid spray foam;

Dabco PT302 is a strong gel catalyst with higher activity than Dabco 33-LV, especially for the foaming reaction, and the odor is also lower than Dabco 33-LV;

The dosage of Dabco PT302 can be adjusted according to the formula, actual application and requirements;

Dabco PT302 can be used in combination with Polycat 5, Dabco PT304 and Dabco PT303 in rigid spray foam formulations.


Shelf life:

Keep unopened for two years


Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse



200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits. Air Chemicals recommends that all polyurethane catalysts be stored in a dry and cool place with proper ventilation. All storage containers must be well sealed to avoid contact with water or other influential substances, because this may change the product in use. Performance. The storage temperature is 10°C to 30°C. Lower or higher temperatures are not suitable and should be avoided as much as possible.

Company Name: Newtop Chemical Materials (Shanghai) Co., Ltd.
Sales Manager: Hunter
E_Mail:   Hunter@newtopchem.com
Telephone: 86-021-5657 7831
Fax: 86-021-5657 7830
Address: Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)
Website: www.bdmaee.net

BDMAEE:Bis (2-Dimethylaminoethyl) Ether

CAS NO:3033-62-3

China supplier

For more information, please contact the following email:


BDMAEE Manufacture !