Dabco NE1070

Overview:

Product name: Dabco NE1070

Alias: Dabco NE1070, gel type polyurethane low odor catalyst, gel type low odor catalyst, polyurethane low odor catalyst, polyurethane gel type catalyst, Dabco low odor catalyst

Product description: Dabco NE1070 catalyst for flexible polyurethane molded foam

 

Product properties:

Appearance: colorless liquid

Viscosity (25℃, mPa.s): 1200

Density (25℃, g/cm3): 1.06

Water solubility: soluble in water

Flash point (PMCC, ℃): 168

Hydroxyl value (mgKOH/g): 730

 

Product Usage:

Dabco NE1070 is a non-emission gel-type polyurethane low-odor catalyst, it will react into the polyurethane matrix, so it will not produce organic volatiles;

Analysis by the vehicle emission standard VDA 278 method shows that Dabco NE1070 has no volatile emissions after the reaction, which solves the problem of odor and emissions when the catalyst is used in the automotive industry, resulting in fogging of the windshield and vinyl staining, so Dabco NE1070 Especially suitable for the production of flexible polyurethane foam for vehicles;

Dabco NE1070 is a non-emission substitute for Dabco 33-LV and can also be used in rigid foam and CASE applications;

Dabco NE1070 can be used for water-foamed TDI or TDI/MDI high resilience foam (HR) and TDI/MDI or MDI type cold-cured polyurethane foam;

The recommended usage of Dabco NE1070 in the MDI system is 0.50-1.5PPHP (per 100 parts of polyol), and the recommended usage in the TDI system is 0.4-0.7PPHP.

 

Introduction:

Dabco NE1070 catalyst is the second generation of new non-emission (NE) gel catalyst for diphenylmethylene diisocyanate (MDI) and toluene diisocyanate (TDI) polyurethane foamed flexible molded foam. Dabco NE1070 catalyst can form a tight chemical bond with the polyurethane foamed plastic matrix while maintaining foam performance. Used in automobile manufacturing, this product can eliminate the odor and volatile organic compounds caused by the polyurethane catalyst, causing fog on the windshield and staining of water drops and polyethylene plastic.

 

Typical physical properties table:

Appearance colorless transparent liquid

Specific gravity 1.06

Viscosity@25℃ mPa.s 1200

Water soluble at 25℃, completely dissolved

Flash point, ℃ 168

 

Features:

Non-emission polyurethane catalyst

Non-emitting volatile organic compounds

Non-staining polyethylene plastic

Prevent fog and water droplets from appearing on the windshield

Masterbatch stable

Reduce odor

Control the stability between batches

 

Shelf life:

Keep unopened for two years

 

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

 

package:

200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated place. All storage containers must be well sealed to avoid contact with water or other influential substances, because this may change the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are not suitable and should be avoided as much as possible.

Company Name: Newtop Chemical Materials (Shanghai) Co., Ltd.
Sales Manager: Hunter
E_Mail:   Hunter@newtopchem.com
Telephone: 86-021-5657 7831
Fax: 86-021-5657 7830
Address: Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)
Website: www.bdmaee.net

BDMAEE:Bis (2-Dimethylaminoethyl) Ether

CAS NO:3033-62-3

China supplier

For more information, please contact the following email:

Hunter@newtopchem.com

BDMAEE Manufacture !