Product name: Dabco NMM
English name: N-methylmorpholine. Abbreviation: NMM.
Alias: Dabco NMM, Niax NMM, Jeffcat NMM, Lupragen N105, PC CAT NMM, Addocat 101, tertiary amine catalyst NMM
Appearance: light yellow liquid
Viscosity (25℃, mPa.s): 8
Density (25℃, g/cm3): 0.87
Water-soluble: insoluble in water
Flash point (PMCC, ℃): 100
Hydroxyl value (mgKOH/g): 0
Molecular formula C5H11NO,
The relative molecular mass is 101.2.
CAS number 109-02-4.
Dabco NMM Niax NMM Jeffcat NMM Lupragen N105 PC CAT NMM Addocat 101 Tertiary Amine Catalyst
DABCO NMM is a tertiary amine polyurethane catalyst, which can be used with DABCO B-16 catalyst for the production of polyester polyurethane flexible foam and molded foam. Characteristics and uses, in the polyurethane industry, as a catalyst for polyester polyurethane soft foam.
Keep unopened for two years
Storage and transportation:
Should be sealed and stored in a dry, cool and ventilated warehouse
200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated place. All storage containers must be well sealed to avoid contact with water or other influential substances, because this may change the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are not suitable and should be avoided as much as possible.