low odor amine catalyst BX405
Product name: Dabco BX405
Alias: Dabco BX405, low odor strong gel amine catalyst BX405, strong gel amine catalyst BX405, low odor amine catalyst BX405, low odor strong gel catalyst BX405, Dabco BX405 polyurethane catalyst
Product description: Low odor catalyst DABCO BX405 for polyurethane insulation
Appearance: colorless liquid
Viscosity (25℃, mPa.s): 13
Density (25℃, g/cm3): 0.914
Water solubility: completely soluble in water
Flash point (PMCC, ℃): >100
Hydroxyl value (mgKOH/g): 327
DABCO BX405 catalyst is a high-efficiency polyurethane amine catalyst, which can strongly catalyze the reaction of polyol and isocyanate, promote the formation of urethane, and thus shorten the post-curing time of polyurethane foam.
DABCO BX405 catalyst has better post-cure performance than POLYCAT 8 (dimethyl cyclohexylamine DMCHA), catalytic activity is equivalent to POLYCAT 8, it has better demolding performance than POLYCAT 8, and its flow is as good as POLYCAT 8. Sex and K factor. DABCO BX405 can be used for various applications of rigid polyurethane foam, such as polyurethane insulation tube, polyurethane insulation board, especially suitable for electrical refrigerator formulation.
Typical physical properties table:
Appearance colorless transparent liquid
Specific gravity 0.914
Viscosity@25℃ mPa.s 13
Water soluble at 25℃, completely dissolved
Flash point, ℃ ＞100
Low-odor hard foam catalyst, replacing dimethylcyclohexylamine DMCHA
Same liquidity and K factor as POLYCAT 8
Better release performance and post-curing
Especially suitable for refrigerator recipes
Dabco BX405 catalyst is a low-odor strong gel catalyst, which can strongly catalyze the reaction of polyol and isocyanate, thereby shortening the post-curing time; compared with dimethylcyclohexylamine DMCHA, Dabco BX405 catalyst has better demolding performance And post-curing performance, low odor, etc.; Dabco BX405 catalyst can be used for various polyurethane rigid foams.
Dabco BX405 is a low-odor strong gel amine catalyst, it will strongly catalyze the reaction of polyol and isocyanate, thereby shortening the post-curing time;
Compared with dimethylcyclohexylamine, Dabco BX405 has better mold release performance and post-curing performance, and low odor;
Dabco BX405 can be used in a variety of polyurethane rigid foams, especially in household appliances.
Keep unopened for two years
Storage and transportation:
Should be sealed and stored in a dry, cool and ventilated warehouse
200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated place. All storage containers must be well sealed to avoid contact with water or other influential substances, because this may change the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are not suitable and should be avoided as much as possible.
|Company Name:||Newtop Chemical Materials (Shanghai) Co., Ltd.|
|Address:||Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)