Product name: DABCO 33-LX, Dabco 33-LX catalyst
Alias: Dabco 33-LX, Dabco 33-LX catalyst, tertiary amine catalyst 33-LX, tertiary amine catalyst 33-LX
Product description: Dabco 33-LX catalyst for low-fogging automotive molding foam system, 33% triethylenediamine innovative diol solution, low emission.
Dabco 33-LX is a mixture of 33% triethylenediamine (DABCO solid amine) and a non-dispersible proprietary solvent carrier. It is a versatile catalyst for the polyurethane industry. Dabco 33-LX has an important influence on promoting the reaction of urethane (polyol-isocyanate) in various flexible and rigid foam applications.
Dabco 33-LX can be used in the automotive interior sponge industry with VOC and atomization requirements. Due to the non-dispersing solvent carrier, it can reduce emissions and cause fogging of the windshield.
Typical physical properties table:
Appearance colorless transparent liquid
Specific gravity 1.02
Viscosity@25℃ mPa.s 223
Soluble at 25℃
Flash point, ℃ ＞110
Appearance: colorless liquid
Viscosity (25℃, mPa.s): 223 ±15
Density (25℃, g/cm3): 1.02
Water-soluble: soluble in water
Flash point (PMCC, ℃): >110
Hydroxyl value (mgKOH/g): 841
Dabco 33-LX is a tertiary amine catalyst that can strongly promote the reaction of urethane (polyol-isocyanate) in various soft and rigid foams.
Multifunctional polyurethane amine catalyst
Polyurethane gel catalyst to promote the late reaction of polyurethane foaming
Liquid, easy to measure and use
Non-emitted solvent, reduce fogging
The Dabco 33-LX catalyst can replace the Dabco solid amine (triethylenediamine) catalyst at a 3:1 ratio in all foam formulations. For example, 0.3 pphp Dabco 33-LX catalyst replaces 0.1 pphp Dabco solid amine (triethylenediamine) catalyst;
The amount of Dabco 33-LX catalyst is exactly the same as Dabco 33-LV catalyst.
Storage and packaging:
Air Chemicals recommends that all polyurethane catalysts be stored in a dry and cool place with proper ventilation. All storage containers must be well sealed to avoid contact with water or other influential substances, because this may change the product in use. Performance. The storage temperature is 10°C to 30°C. Lower or higher temperatures are not suitable and should be avoided as much as possible.
Keep unopened for two years
Storage and transportation:
Should be sealed and stored in a dry, cool and ventilated warehouse
200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.
|Company Name:||Newtop Chemical Materials (Shanghai) Co., Ltd.|
|Address:||Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)