Product name: Polycat 9
Alias: Tris(dimethylaminopropyl)amine, Polycat 9, PC CAT NP109, low odor tertiary amine catalyst Polycat 9, low odor catalyst Polycat 9, tertiary amine catalyst Polycat 9
Polycat 9 catalyst is a low-odor tertiary amine that can balance the reaction of urethane and urea in flexible and rigid foam applications. As a cocatalyst, Polycat 9 catalyst can be used together with blowing catalyst and gel catalyst to balance the reaction and provide a smooth rising curve.
Appearance: colorless to light yellow liquid
Viscosity (25℃, mPa.s): 6
Density (25℃, g/cm3): 0.87
Water solubility: soluble in water
Flash point (PMCC, ℃): 102
Hydroxyl value (mgKOH/g): 0
Typical physical properties table:
Appearance colorless transparent liquid
Specific gravity 0.87
Viscosity@25℃ mPa.s 6
Water soluble at 25℃, completely dissolved
Flash point, ℃ 102
Polycat 9 is a low-odor tertiary amine catalyst that can balance and promote the reaction of urethane and urea in soft and rigid foams;
Polycat 9 can be used as an auxiliary catalyst for foaming and gel-reinforced amine catalysts to balance the reaction and make the initiation reaction smooth;
Polycat 9 is mainly used for rigid polyurethane foam, polyurethane insulating foam, spout foam, laminates and plates for refrigerators;
Polycat 9 can also be used for polyurethane microcellular foam, such as polyurethane soles.
Keep unopened for two years
It is recommended to use Polycat 9 catalyst in various rigid polyurethane systems. The main application is insulation/insulation edge foam, including spray hard foam, polyurethane insulation board, polyurethane insulation tube, refrigerator, solar hard foam and so on.
Polycat 9 catalyst is recommended for use in microcellular elastomer foams, such as shoe sole formulations, and as a cocatalyst in semi-rigid foam and polyurethane flexible molded foam applications.
Storage and transportation:
Should be sealed and stored in a dry, cool and ventilated warehouse
200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated place. All storage containers must be well sealed to avoid contact with water or other influential substances, because this may change the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are not suitable and should be avoided as much as possible.
|Company Name:||Newtop Chemical Materials (Shanghai) Co., Ltd.|
|Address:||Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)