Polyurethane sealer BA100
Polyurethane sealer BA100
Product Name: Polyurethane Sealing Agent BA100
Alias: Polyurethane sealing agent BA100, delayed catalyst BA100, polyurethane sealing agent
Product description: BA100 can be used to delay the catalytic reaction and improve fluidity while maintaining curing time. It is reactive to isocyanates and will react into a polymer matrix. It is usually used with non-emissive catalysts (such as NE1070, NE500 or NE210 catalysts), but it can also be used with traditional tertiary amine catalysts to delay the catalytic reaction.
Appearance: light yellow transparent liquid
Specific gravity: 1.1g/cm3
Water solubility (25℃): Partially dissolved
Flash point: >200℃
BA100 can be used to delay the catalytic reaction and improve fluidity while maintaining curing time. It is reactive to isocyanates and will react into a polymer matrix. It is usually used with non-emissive catalysts (such as NE1070, NE500 or NE210 catalysts), but it can also be used with traditional tertiary amine catalysts to delay the catalytic reaction.
BA100 sealer is used for TDI or TDI/MDI high resilience (HR) foam and TDI/MDI or MDI-based cold-curing molded polyurethane foam. A higher amine content can be used to speed up the curing time while maintaining a longer emulsification time.
＊ Delay the milky white time
＊ No VOC emission
＊ No windshield fogging
＊ Reduce peculiar smell
* Good hydrolytic stability
It is recommended to use 0.2-0.8 pphp Dabco BA100 sealant in the MDI system, and 0.1-0.4 pphp sealant in the TDI system.
Dosage of soft block foam:
It is recommended to use 0.06-0.15 pphp Dabco BA100 sealant.
Keep it unopened for two years
Storage and transportation:
Should be sealed and stored in a dry, cool and ventilated warehouse
200KG/barrel Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the product performance from being mixed with other substances such as water resistance. Store in a cool, dry place, keep the container tightly closed, and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, take a shower and change clothes. Store contaminated clothes separately and use them after washing. Maintain good hygiene habits. The company recommends that all polyurethane catalysts be stored in a dry and cool place with proper ventilation. All storage containers must be well sealed to avoid contact with water or other influential substances, as this may change the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided as much as possible.