no emission amine catalyst
Overview:
Product name: Dabco NE600
Alias: Dabco NE600, no emission amine catalyst, amine catalyst Dabco NE600
Product description: Non-emission catalyst Dabco NE600 for polyurethane bulk sponge
Product properties:
Appearance: light yellow liquid
Viscosity (25℃, mPa.s): 370
Density (25℃, g/cm3): 1.02
Water solubility: soluble in water
Flash point (PMCC, ℃): 137
Hydroxyl value (mgKOH/g): 270
Introduction:
Dabco NE600 catalyst is a balanced non-emitting tertiary amine used in the production of low-emission polyurethane foams. Dabco NE600 catalyst can react with the polyurethane matrix, so it will not cause amine emissions.
Dabco NE600 catalyst is used in flexible polyurethane bulk sponge applications to meet Certipur or LGA requirements.
Typical physical properties table:
Appearance light yellow transparent liquid
Specific gravity 1.02
Viscosity@25℃ mPa.s 370
Soluble at 25℃
Flash point, ℃ 137
Features:
Balanced non-emitted catalyst
Promote urea (water-isocyanate) reaction
Improve foam flow
Can meet Certipur or LGA specifications in flexible foam applications
Recommendations:
It is recommended to use Dabco NE600 catalyst in water foaming, dichloromethane (MC) or other bulk polyurethane foam systems that replace blowing agents. Dabco NE600 catalyst is compatible with other commonly used polyurethane catalysts and additives, and is easily miscible with polyols and polyol/water mixtures.
Product Usage:
Dabco NE600 is a non-emission amine catalyst used to promote the urea (water-isocyanate) reaction. It will react into the polyurethane matrix, so it will not produce organic volatiles;
Dabco NE600 is also used in flexible bulk foam (polyether and polyester) applications to meet Certipur or LGA requirements;
Dabco NE600 is a non-emission catalyst that can improve foam fluidity and can replace Dabco 33-LV catalyst;
Dabco NE600 can be used in any polyurethane foam system such as water foaming and methylene chloride foaming.
Shelf life:
Keep unopened for two years
Storage and transportation:
Should be sealed and stored in a dry, cool and ventilated warehouse
package:
200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated place. All storage containers must be well sealed to avoid contact with water or other influential substances, because this may change the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are not suitable and should be avoided as much as possible.
Company Name: | Newtop Chemical Materials (Shanghai) Co., Ltd. |
Sales Manager: | Hunter |
E_Mail: | Hunter@newtopchem.com |
Telephone: | 86-021-5657 7831 |
Fax: | 86-021-5657 7830 |
Address: | Rm. 1104, No. 258, Songxing West Road, Baoshan District, Shanghai, China (Mainland) |
Website: | www.bdmaee.net |