BDMAEE

the large and growing family of jeffcat amine catalysts from performance products provides solutions to a wide range of urethane applications including polyether and polyester foams, coatings, elastomers, and high-modulus urethane plastics. the unique industry-leading low emission jeffcat amine catalyst product range results from the value of ’s advanced technologies and 40-plus years of experience with urethane catalysts and addresses the environmental, health and safety aspects of polyurethane foam production and usage in many application area including automotive, furniture & bedding and spray foams.

general purpose catalysts

jeffcat zf-20   bis-(2-dimethylaminoethyl)ether : a very strong, highly efficient blowing catalyst.

jeffcat  zf-22   70% zf-20 in dipropylene glycol

jeffcat  zf-24     23% zf-20 in dipropylene glycol

jeffcat  zf-26       11% zf-20 in dipropylene glycol

jeffcat  zf-123       35% zf-20 in a 3000 mw triol

jeffcat  zf-125         35% zf-20 in a high viscosity reactive diluent

jeffcat  zf-167         47% zf-20 in dipropylene glycol

jeffcat  zf-234

jeffcat  zf-54   delayed-action catalyst made up of zf-22 partially neutralized with formic acid. provides excellent cure and flow as co-catalyst.

jeffcat bdma     benzyldimethylamine

jeffcat dmcha   n,n-dimethylcyclohexylamine widely used catalyst for all types of rigid foams.

jeffcat dmea         n,n-dimethylethanolamine

jeffcat pmdeta     pentamethyldiethylenetriamine : especially useful as catalyst for hcfc/ water-blown rigid foams.

jeffcat  td-33a       33% teda in dipropylene glycol

jeffcat  tdbdo       25% td-100 in 75% 1,4-butanediol (bdo)

jeffcat  tdeg              33.3% td-100 in monoethylene glycol

jeffcat  z-80       n,n,n, -tris(3-dimethylaminopropyl-) amine : it acts as a low odor gel catalyst, designed mainly for use in rigid polyurethane foams.

jeffcat  z-140       low odor balanced catalyst with excellent postcure characteristics.

jeffcat zr-40       n,n,n’,n”,n”-pentamethyl-dipropylenetriamine : very useful in cold-molded hr foams. low odor catalyst with a good balance between gel and blow.

low emission catalysts / reactive catalysts

jeffcat  dmapa    used in a variety of polyurethane foam applications.

jeffcat  dpa         low emission catalyst with good gelation and flowability.

jeffcat  le-15   this is reactive amine catalyst blend. this product strongly promotes the blowing reaction and is formulated to permit its easy introduction into polyurethane foam formulations.

jeffcat  le-60   reactive blowing catalyst used in foams requiring low emissions.

jeffcat  le-220 high potency, low odor gel catalyst designed to replace jeffcat  td-33a. used in a wide variety of flexible and rigid pu formulations with excellent processing latitude.

jeffcat  le-310 low emission gel catalyst which can replace jeffcat td-33a on an equivalent part basis. can be used in a wide variety of flexible slabstock and high resiliency (hr) foam grades.

jeffcat le-425     formulated blend of reactive blowing and gelling catalysts.

jeffcat le-520

jeffcat  le-526

jeffcat  led-103   reactive, acid blocked, low emissions type blowing catalyst that offers improved material handling, low-corrosion, and phase stability in fully formulated b-side flexible molded foams.

jeffcat  led-204   reactive, acid blocked, low emissions, low-corrosion type gelling catalyst used in all types of flexible molded foams.

jeffcat  s-117           thisis a formulated strong blowing catalyst for low- and medium-density spray foams. the product is a non-fugitive catalyst because it contains reactive hydroxyl groups which react into the foaming matrix, thus minimizing catalyst odor in finished foams.

jeffcat  z-110       used in a variety of polyurethane foam applications.

jeffcat  z-130     low emission reactive gel catalyst.

jeffcat  z-131     blend of low emission, reactive gelling amine catalysts.

jeffcat  zf-10   strong blowing catalyst that is highly efficient. used in foams requiring low emission.

jeffcat  zr-50   low emission catalyst with exceptional balance and versatility.

jeffcat  zr-70    for use mainly in spray and packaging foam applications.

flexible polyester foam catalysts

jeffcat  nem   n-ethylmorpholine — promotes surface cure for  flexiblepolyester foams and excellent processing in polyester-based flexible foams.

jeffcat  nmm  n-methylmorpholine — good solubilizer in making  polyester foams. also useful in high rise rigid molded applications.

jeffcat mm-70   reduced odor amine to replace jeffcat nem in flexible ester foams.

jeffcat pm           low odor jeffcat nem replacement for round block flexible ester bun  stock foam.

jeffcat m-75         reduced odor formulated catalyst that gives excellent processing latitude in  polyester-based flexible foams and clear activator solutions.

jeffcat dm-70         improves green strength and can be used for charcoal polyester-based flexible foams.

specialty amine catalysts

jeffcat  dmdee     2,2′-dimorpholinodiethylether — strong blowing  catalyst. provides a stable prepolymer system. excellent for 1-k systems.

jeffcat   dmdlc     used for 1-k moisture cure applications with critical color requirements.

jeffcat  zf-53       formulated catalyst made from td-33a and zf-22. designed for flexible  slab foams.

jeffcat   zf-54         delayed-action catalyst made up of zf-22 partially neutralized with formic acid.  provides excellent cure and flow as co-catalyst.

jeffcat z-65p         formulated catalyst for accelerated cure in a medium mw diol (ppg-400). improves early compression set. wide processing latitude with alternate blowing agent.

jeffcat  zr-81           delayed action balanced catalyst used to extend process equipment    service times.

back-end cure catalysts

jeffcat tr-52      back-end cure co-catalyst. shortens the demold time of rigid foam systems.

jeffcat tr-90      1,3,5-tris(3-(dimethylamino)propyl)- hexahydro-   s-triazine — improved dimensional stability in many rigid foam systems. useful as a cocatalyst in rigid spray foam.