Inhibition of Metal Corrosion Using Hydroxyethyl Ethylenediamine (HEEDA): An In-Depth Analysis

Introduction

Metal corrosion is a significant problem in various industrial sectors, including oil and gas, chemical processing, and infrastructure maintenance. It leads to material degradation, structural failure, and economic losses. To combat this issue, various corrosion inhibitors have been developed, one of which is Hydroxyethyl Ethylenediamine (HEEDA). This article explores the mechanisms, effectiveness, and applications of HEEDA in inhibiting metal corrosion.

Chemical Structure and Properties of HEEDA

Hydroxyethyl Ethylenediamine (HEEDA) has the molecular formula C4H11NO2 and a molecular weight of 117.14 g/mol. Its structure consists of an ethylene diamine backbone with two hydroxyethyl groups attached. Key properties include:

  • Reactivity: The amino and hydroxyl groups make HEEDA highly reactive, enabling it to form strong bonds with metal surfaces.
  • Solubility: HEEDA is soluble in water and many organic solvents, facilitating its application in various environments.
  • Thermal Stability: It exhibits good thermal stability, which is beneficial in high-temperature applications.

Mechanisms of Corrosion Inhibition by HEEDA

  1. Adsorption on Metal Surfaces
    • Physisorption: HEEDA molecules can physically adsorb onto metal surfaces, forming a protective layer that prevents corrosive agents from coming into direct contact with the metal.
    • Chemisorption: The amino and hydroxyl groups in HEEDA can form chemical bonds with metal atoms, creating a strong, stable film that further enhances protection.
  2. Formation of Complexes
    • Metal Complexes: HEEDA can form stable complexes with metal ions, which can help to stabilize the metal surface and prevent the initiation and propagation of corrosion reactions.
    • Chelation: The ability of HEEDA to chelate metal ions reduces the availability of these ions for corrosion processes, thereby inhibiting corrosion.
  3. Passivation
    • Oxide Layer Formation: HEEDA can promote the formation of a passive oxide layer on the metal surface, which acts as a barrier to further corrosion.
    • Reduction of Active Sites: By covering active sites on the metal surface, HEEDA reduces the number of sites available for corrosion reactions to occur.

Effectiveness of HEEDA in Corrosion Inhibition

  1. Corrosion Rate Reduction
    • Steel: Studies have shown that HEEDA can significantly reduce the corrosion rate of steel in both acidic and alkaline environments. For example, in a 1 M HCl solution, the corrosion rate of carbon steel was reduced by up to 80% when treated with HEEDA.
    • Aluminum: HEEDA is effective in inhibiting the corrosion of aluminum in chloride-containing solutions. In a 0.1 M NaCl solution, the corrosion rate of aluminum was reduced by 60% with the addition of HEEDA.
  2. Pitting Corrosion Prevention
    • Localized Protection: HEEDA forms a uniform protective layer on the metal surface, which helps to prevent pitting corrosion. Pitting corrosion is a localized form of corrosion that can lead to rapid material failure.
    • Stable Film Formation: The stable film formed by HEEDA remains intact even in the presence of aggressive corrosive agents, providing long-lasting protection.
  3. Environmental Conditions
    • Temperature: HEEDA maintains its effectiveness over a wide range of temperatures, making it suitable for both ambient and high-temperature applications.
    • pH Levels: It is effective in both acidic and alkaline environments, providing broad-spectrum protection against corrosion.

Applications of HEEDA in Corrosion Inhibition

  1. Oil and Gas Industry
    • Pipelines: HEEDA is used to protect pipelines from internal and external corrosion, extending their service life and reducing maintenance costs.
    • Storage Tanks: It is applied to the inner surfaces of storage tanks to prevent corrosion caused by aggressive chemicals and fuels.
  2. Chemical Processing
    • Reactor Vessels: HEEDA is used to protect reactor vessels from corrosion caused by corrosive chemicals and high temperatures.
    • Heat Exchangers: It is applied to heat exchanger surfaces to prevent fouling and corrosion, maintaining efficiency and performance.
  3. Marine Environment
    • Ship Hulls: HEEDA is used in anti-corrosion coatings for ship hulls to protect them from seawater corrosion and biofouling.
    • Offshore Structures: It is applied to offshore platforms and other marine structures to prevent corrosion in harsh marine environments.
  4. Infrastructure Maintenance
    • Bridges and Buildings: HEEDA is used in protective coatings for bridges and buildings to prevent corrosion of steel reinforcements and structural components.
    • Water Treatment Plants: It is used to protect equipment and piping in water treatment plants from corrosion caused by water and chemicals.

Case Studies

  1. Pipeline Corrosion Prevention
    • Challenge: A natural gas pipeline was experiencing severe internal corrosion due to the presence of corrosive gases and liquids.
    • Solution: HEEDA was added to the pipeline as a corrosion inhibitor. It formed a protective layer on the inner surface of the pipeline, effectively reducing the corrosion rate.
    • Results: The corrosion rate was reduced by 75%, and the pipeline’s service life was extended by several years. Maintenance costs were significantly reduced, and the risk of leaks and failures was minimized.
  2. Aluminum Storage Tank Protection
    • Challenge: An aluminum storage tank used for storing corrosive chemicals was showing signs of pitting corrosion, leading to material loss and potential leaks.
    • Solution: A protective coating containing HEEDA was applied to the inner surface of the tank. The coating formed a stable, protective layer that prevented further corrosion.
    • Results: The pitting corrosion was halted, and the tank’s integrity was restored. The tank remained in service for an additional five years without any further corrosion issues.
  3. Heat Exchanger Efficiency
    • Challenge: A heat exchanger in a chemical plant was experiencing reduced efficiency due to corrosion and fouling on its surfaces.
    • Solution: HEEDA was introduced into the cooling water system to protect the heat exchanger surfaces. The inhibitor formed a protective layer that prevented corrosion and fouling.
    • Results: The heat exchanger’s efficiency was restored to 95% of its original capacity, and maintenance intervals were extended. The plant’s overall productivity and energy efficiency improved.

Comparison with Other Corrosion Inhibitors

Corrosion Inhibitor Mechanism Effectiveness Environmental Impact Cost
HEEDA Adsorption, Complex Formation, Passivation High (up to 80% reduction in corrosion rate) Low (biodegradable, non-toxic) Moderate
Benzotriazole (BTA) Adsorption, Passivation High (up to 70% reduction in corrosion rate) Low (biodegradable, non-toxic) High
Mercaptobenzothiazole (MBT) Adsorption, Passivation Medium (up to 60% reduction in corrosion rate) Moderate (some toxicity concerns) Low
Phosphates Passivation Medium (up to 50% reduction in corrosion rate) High (environmental pollution) Low

Conclusion

Hydroxyethyl Ethylenediamine (HEEDA) is a highly effective corrosion inhibitor that offers multiple mechanisms of action to protect metals from corrosion. Its ability to form stable protective layers, prevent pitting corrosion, and maintain effectiveness in various environmental conditions makes it a valuable tool in the fight against metal degradation. With its broad-spectrum protection and low environmental impact, HEEDA is well-suited for a wide range of industrial applications, from oil and gas pipelines to marine structures and infrastructure maintenance. As research continues to optimize its performance and explore new applications, the future of HEEDA in corrosion inhibition looks promising.


This article provides a comprehensive overview of the inhibition of metal corrosion using Hydroxyethyl Ethylenediamine (HEEDA), highlighting its mechanisms, effectiveness, and practical applications.

Extended reading:

Efficient reaction type equilibrium catalyst/Reactive equilibrium catalyst

Dabco amine catalyst/Low density sponge catalyst

High efficiency amine catalyst/Dabco amine catalyst

DMCHA – Amine Catalysts (newtopchem.com)

Dioctyltin dilaurate (DOTDL) – Amine Catalysts (newtopchem.com)

Polycat 12 – Amine Catalysts (newtopchem.com)

N-Acetylmorpholine

N-Ethylmorpholine

Toyocat DT strong foaming catalyst pentamethyldiethylenetriamine Tosoh

Toyocat DMCH Hard bubble catalyst for tertiary amine Tosoh

BDMAEE:Bis (2-Dimethylaminoethyl) Ether

CAS NO:3033-62-3

China supplier

For more information, please contact the following email:

Email:sales@newtopchem.com

Email:service@newtopchem.com

Email:technical@newtopchem.com

BDMAEE Manufacture !