Product Description: Dabco B-16 is an amine catalyst commonly used to improve the skin curing of a variety of flexible and rigid foams, and can be used in conjunction with Dabco NCM in die-cut polyurethane flexible block foams; Dabco B16 catalyst for polyurethane block foam systems.
Appearance: light yellow liquid
Water solubility: slightly soluble in water
Flash point (PMCC,℃): 39.5
Hydroxyl value (mgKOH/g): 0
Dabco B-16 is an amine catalyst commonly used to improve the skin curing of a variety of flexible and rigid foams, and can be used with Dabco NCM in die-cut polyurethane flexible block foams;
Dabco B-16 can be used in polyurethane integral skin foams, microcellular foams, spray foams and polyurethane die cut flexible foams.
Dabco B-16 Catalyst is a polyurethane tertiary amine that can be used in conjunction with Dabco NCM in cuttable flexible block foams for polyurethane systems.
Dabco B-16 Catalyst is commonly used as an amine catalyst to improve the skin cure of a variety of flexible and rigid foams, as well as in polyurethane integral skin foams and microcellular elastomer systems.
Typical Physical Properties.
Appearance Colorless transparent liquid
Specific gravity 0.8
Viscosity @25℃ mPa.s 9
Water solubility @25℃ insoluble
Flash point, ℃ 40
Increase air permeability and foam stability
Improves polyurethane surface curing
Dabco B16 Catalyst is used in flexible polyurethane foams such as furniture and home furnishing foam, automotive upholstery foam; and rigid foam applications such as polyurethane insulated tubes, polyurethane insulated panels, polyurethane waterproofing coatings, and polyurethane sealants;
Dabco B16 catalyst improves surface curing and appearance and reduces crusting.
Keep unopened for two years
Storage and Transportation:
Should be kept sealed and stored in a dry, cool and ventilated warehouse
200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.